Novitec wifi booster plus#
If you use a Windows-based computer, use the ProSAFE® Plus Utility to detect the IP address (see Access the Switch With the ProSAFE Plus Utility on page 18).To determine the IP address of the switch, do one of the following: To access the switch, use the IP address that the DHCP server assigned to the switch. ''By default, the DHCP client of the switch is enabled. You can configure and manage advanced features of the switch either by using your computer’s web browser and accessing the switch at its IP address or by installing the ProSAFE® Plus Utility on your Windows-based computer.'' However, it is also possible to configure the switch connected directly only to the computer that you are using to configure it, and not connected to the network (off-network). For easiest access, we recommend that you cable the switch to a network with a router or DHCP server that assigns IP addresses and power on the switch. Just connect power, connect to your network and to your other devices, and you’re done. ''Gigabit Ethernet Smart Managed Plus Switches are plug-and-play, so they can be used without any configuration. as in for it's own IP settings and NOT for any connected devices to the switch.ĭisabling DHCP (I THINK) allows you to set a static IP for the switch and NOT any devices connected to the switch.
Novitec wifi booster manual#
Having a quick read through the manual for the switch and it seems the DHCP mode is for the switch to either be in DHCP mode (switch requests the router for the IP and the router assigns it one from it's IP range) or Static. Should I disable or enable DHCP on it and the Edimax?
0 kommentar(er)
